Construction of demo plant for fibre-based products in Finland is progressing on target

By -

Type of post: NEWS IN BRIEF.

Metsä Spring (Metsä Group’s innovation company) and Valmet are building a demo plant in Äänekoski that will manufacture new fibre products for food packaging and other purposes.
Images of the construction of the demo plant.

Figure 1. Construction of demo plant for fibre-based products in Finland is progressing on target (taken from the press release)

The demo plant reached its full height on 23 March 2021 with construction work proceeding as planned. The main equipment delivered by Valmet will be installed in the autumn 2021, and the first test runs should begin at the end of 2021 (approximately 12 months after the start of the construction).

The demo plant will manufacture wood-based packages, which can replace plastic and aluminium packages. Products are renewable, recyclable and biodegradable, and their raw material comes from sustainably managed forests, which are primarily owned by Finnish families. There is already now significant demand for the products, and the demand is estimated to grow in the future. If it is possible to prove that the manufacturing method and the product function well, a larger production unit could be built next to Metsä Group’s bioproduct mill.

Popular Posts

Braskem and Sojitz launch Sustainea to produce and market biobased glycols

By -
Image
Type of post: NEWS IN BRIEF. Braskem and Sojitz have announced the launch of Sustainea, which will produce and market bioMEG (monoethylene glycol) and bioMPG (monopropylene glycol). The market launch of the brand follows the approval of the joint venture (the process began in March 2022) by antitrust authorities. Press release: " Braskem and Sojitz Corporation launch Sustainea ", 21/10/2022. Related posts:  - " Braskem and Haldor Topsoe to validate new bio-MEG production process in a demo plant ", 13/11/2017. - " Braskem and Haldor Topsoe start production of biobased MEG at their demo plant in Lyngby ", 25/11/2020. Figure 1. Braskem and Sojitz launch Sustainea to produce and market biobased glycols The business plan envisages the construction of three industrial plants, with the first unit slated for operational startup in 2025, taking advantage of market opportunities and feedstock availability. The locations where the industrial units will be built have
Read more

New HVO plant enters into operation in China

By -
Image
Versión en Español Type of post: NEWS. According to S&P Global Platts, last month, State-owned energy company Beijing Sanju Environmental Protection & New Materials launched a 400 ktons/year capacity HVO plant in Rizhao (Shandong, China) province. The biorefinery utilizes used cooking oil (UCO) and palm oil mill effluent (POME) as feedstocks. News (S&P Global Platts): “ China reinforces position in HVO market with launch of new 400,000 mt/year plant ”, 24/03/2021. Hydrotreating (HVO) – Concepts, feedstocks and specifications . HVO posts. Figure 1. Beijing Sanju, current and planned HVO plants (source: S&P Global Platts Analytics) The new HVO plant (Shandong Sanju Bioenergy) was the result of a cooperation agreement (07/04/2020) between Beijing Sanju (primary owner, investor and tech provider), Hainan Qilu Development (investor and subsidiary of Qilu Transportation Development Group) and the Juxian County Government (minority owner, fixed assets). Shandong Sanju Bio
Read more

Alcohol-To-Fuel

By -
Image
Type of post: OVERVIEW. Introduction Bioethanol produced from fermentation of sugar based crops is the major product of the biofuels industry [1]. But, ethanol is not a “drop-in” solution and requires substantial changes in refining or distribution infrastructure. The properties of this alcohol (an oxygenated single molecule) are largely different than those of gasoline, diesel and jet fuel blendstocks (mixtures of hydrocarbons), leading to problems in blends. Ethanol can cause corrosion problems in transport pipelines that were designed to work only with gasoline. In the specific case of the aviation fuel, there are stricter quality requirements than fuels used in road transport. Ethanol shows low compatibility as a blendstock for aviation fuel because of its high volatility and water absorption and low flash point and energy density. Butanol is not as incompatible as ethanol, however, it still poses unacceptable safety risks due to its low flash point and high volatilit
Read more

Biobased polyolefins - Biobased Polyethylene (bio-PE)

By -
Image
Versión en Español Section: BIOBASED PLASTICS Series: Biobased Vinyl Polymers. - Biobased Polyethylene (bio-PE). Biobased Polyethylene (bio-PE) / Green Polyethylene / Renewable Polyethylene - Its biobased carbon content can reach 100%. - Renewable resource . It is produced from renewable biomass feedstocks as sugars or vegetable oils. - It reduces GHG emissions. Each ton produced captures and sequesters CO 2 from the atmosphere. - 100% drop-in . Chemically identical to its petrochemical counterpart. It has the same processing characteristics as fossil PE, therefore, it can be processed in the same equipment. - Non-biodegradable . It cannot be composted or biodegraded. - Thermoplastic . It can be molten and remoulded into the desired shape. - It can be recycled and processed into new bio-PE products using conventional technologies without requiring additional investments. - Building block or monomer: biobased ethylene .
Read more

Biorrefinerías de ácido levulínico

By -
Image
Fecha de publicación: 16/11/2015 Última actualización: 20/02/2016 Descripción 1,2 El ácido levulínico (también conocido como ácido 4-oxopentanoico o ácido γ-cetovalérico) es un compuesto orgánico con fórmula química C 5 H 8 O 3 . Es un sólido cristalino soluble en agua y en disolventes orgánicos polares. Contiene un grupo cetona y un grupo carboxilo cuya presencia posibilita patrones reactivos interesantes. Es uno de los “ Biobased Chemical Building Blocks ” más reconocidos, precursor de un amplio número de compuestos (véase el apartado Aplicaciones más abajo). De hecho, fue reconocido por el DoE como una de las principales moléculas plataforma del futuro y puede cubrir de manera eficaz muchas de las atribuciones de productos químicos y materiales procedentes del petróleo. Tecnologías de proceso 1,3,4,5 La degradación controlada de azúcares C6 mediante ácidos es el proceso más usado para preparar ácido levulínico a partir de biomasa lignocelulósica. Se han estu
Read more