Steeper Energy commissions its Advanced Biofuels Centre in Calgary

By -

Type of post: NEWS IN BRIEF.

Steeper Energy has recently constructed and commissioned its Advanced Biofuels Centre (ABC) in Calgary (Alberta, Canada).
Related posts:

Video. Advanced Biofuels Centre

This highly specialized laboratory and upgrader is enhancing Steeper’s expertise and patent portfolio for the upgrading of its Hydrofaction® Oil to ASTM specified drop-in biofuels and value-added biochemicals. ABC aims to develop economic pathways to 100% renewable fuels and chemicals and deliver solutions for Project Licensees to maximize returns.

Popular Posts

Hydrotreating (HVO) – Advantages over FAME and properties

By -
Image
Versión en Español Section: ADVANCED BIOFUELS Series: HVO - Hydrotreating (HVO) – Concepts, feedstocksand specifications - Hydrotreating (HVO) – Advantages over FAME and properties - Hydrotreated Vegetable Oils (HVO) Biorefineries – The rise of renewable diesel - Posts: HVO Hydrotreating is an alternative process to esterification to produce diesel from biomass. Traditionally, diesel components produced from vegetable oils are made by an esterification process. In fact, HVO are commonly referred to as renewable diesel or green diesel in order to distinguish from Fatty Acid Methyl Esters (FAME), best known as biodiesel. Other acronyms are also used depending on the feedstock, such as Rape Seed Methyl Ester” (RME), “Soybean Methyl Ester” (SME), “Palm Oil Methyl Ester” (PME) or “Used Cooking Oils Methyl Ester (UCOME). In the HVO production process, hydrogen is used to remove the oxygen from the triglycerides and does not produce any glycerol as a side product. Additi...
Read more

Alcohol-To-Fuel

By -
Image
Type of post: OVERVIEW. Introduction Bioethanol produced from fermentation of sugar based crops is the major product of the biofuels industry [1]. But, ethanol is not a “drop-in” solution and requires substantial changes in refining or distribution infrastructure. The properties of this alcohol (an oxygenated single molecule) are largely different than those of gasoline, diesel and jet fuel blendstocks (mixtures of hydrocarbons), leading to problems in blends. Ethanol can cause corrosion problems in transport pipelines that were designed to work only with gasoline. In the specific case of the aviation fuel, there are stricter quality requirements than fuels used in road transport. Ethanol shows low compatibility as a blendstock for aviation fuel because of its high volatility and water absorption and low flash point and energy density. Butanol is not as incompatible as ethanol, however, it still poses unacceptable safety risks due to its low flash point and high volatilit...
Read more

Cellulosic ethanol – The basics: Conversion pathway - Biochemical

By -
Image
Versión en Español Section: ADVANCED BIOFUELS Series: Cellulosic ethanol - The basics: Concept and feedstocks - The basics: Conversion pathway – Biochemical - The basics: Conversion pathway –Thermochemical - Cellulosic ethanol biorefineries at commercial scale Posts: CELLULOSIC ETHANOL 1. Introduction The biochemical conversion process has attracted the most attention because of its similarities to the process used to produce ethanol from corn grain. As it was highlighted in the first post of this series, the production process for ethanol made from cellulosic feedstocks requires breaking down the feedstock into fermentable sugars through innovative technologies in the form of pretreatment and hydrolysis. The remaining steps are similar to those used in conventional ethanol plants. 2. Pretreatment The pretreatment is the first step in all of the different processes available for the biochemical conversion pathway but the definition of this unit operatio...
Read more

Biobased polyolefins - Biobased Polyethylene (bio-PE)

By -
Image
Versión en Español Section: BIOBASED PLASTICS Series: Biobased Vinyl Polymers. - Biobased Polyethylene (bio-PE). Biobased Polyethylene (bio-PE) / Green Polyethylene / Renewable Polyethylene - Its biobased carbon content can reach 100%. - Renewable resource . It is produced from renewable biomass feedstocks as sugars or vegetable oils. - It reduces GHG emissions. Each ton produced captures and sequesters CO 2 from the atmosphere. - 100% drop-in . Chemically identical to its petrochemical counterpart. It has the same processing characteristics as fossil PE, therefore, it can be processed in the same equipment. - Non-biodegradable . It cannot be composted or biodegraded. - Thermoplastic . It can be molten and remoulded into the desired shape. - It can be recycled and processed into new bio-PE products using conventional technologies without requiring additional investments. - Building block or monomer: biobased ethylene . ...
Read more

Finding out about the Canada’s first algal biorefinery project – ACC demonstration plant

By -
Image
New Year, new dreams, new projects… We begin 2017 with several posts about CO 2 conversion technologies. Today, in the first one of them, an overview on the Canada’s first algal biorefinery demonstration project is provided. It includes an interesting interview with one of the responsible for the success of this engaging project. Let us start by knowing more about the background. Background The Government of Canada is supporting clean energy research and development at all stages of the innovation spectrum. In particular, it is boosting later stage technology demonstrations to help speed the commercialization and adoption of cleaner techniques and methods. In this sense, in 2013, the National Research Council of Canada (NRC), Canadian Natural Resources Limited (CNRL) and Pond Technologies announced a multi-million dollar investment to build and operate a demonstration-scale algal biorefinery facility in Alberta. While the project’s initial engineering phase was complete...
Read more